Nobody has come back since the equipment was dropped off
Once we are on the job site, equipment left unattended cannot be adjusted, and machines get pulled or bumped.
Specialty cleanup
Nationwide
Moisture Monitoring in the United States
Our hands-on restoration team tracks moisture numbers during drying and adjusts equipment when needed so wet materials continue moving toward a verified dry condition.
- Restoration phone support around the clock
- Residential and commercial loss response
- Measured extraction, cleanup, and drying
- One restoration team from assessment to dry standard
Signs to keep an eye out for
When to call us for moisture monitoring
Before we get to work, if you notice any of these problems, call us before water has more time to spread into nearby materials.
You have not been shown a single number
In plain words, every visit should produce a moisture content reading you can look at. To straighten this out, if nobody can tell you today's numbers, they are not being recorded.
Every machine is in the same spot on day four
Before we get to work, readings normally change which areas need help, so placement should change too. Before we get to work, no equipment adjustment across a week as a rule means no readings.
You were told it takes about a week, with no explanation
To straighten this out, a real answer sounds like a target reading and a projection from the current numbers. Before we get to work, a flat calendar price breakdown is a guess dressed up as a schedule.
The invoice lists equipment days but no monitoring visits
Once we are on the job site, a mitigation invoice should show both the equipment run time and the visits that justified it.
Someone wants to pull equipment since it looks dry
In plain words, surfaces look dry days before assemblies are finished. Before we get to work, looks are not a verification reading.
What happens
How we take on moisture monitoring
Our hands-on restoration team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
Monitoring points marked on day one
In plain words, each wet material gets a marked monitoring point that we return to every visit.
A dry standard set from your own building
Once we are on the job site, we read the same materials in an unaffected reference area to establish what normal looks like here.
Daily moisture content readings
Once we are on the job site, every marked point is read with the same moisture meter each day.
A daily psychrometric log
Once we are on the job site, we record temperature and humidity inside the drying area, in an unaffected room and outdoors with a thermo hygrometer.
Equipment adjusted to what the numbers show
In plain words, slow areas get more airflow or a repositioned dehumidifier. To straighten this out, areas that hit target lose their machines, which lowers your bill.
A photo log tied to each visit
In plain words, we photograph equipment in place and the meter at the reading location. Before we get to work, the photo log is what makes the drying log verifiable later.
Talk with a restoration specialist
Water loss in the United States?
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
What to expect from our hands-on restoration team
Here is how we as a rule handle moisture monitoring near the United States.
-
1
We ask what has already been documented
Once we are on the job site, if a job is underway, let us know what readings exist and who took them. In plain words, if it is day one, we start the record from scratch.
Your call -
2
Baseline readings and marked points
In plain words, every wet material is read, marked and photographed, and a dry standard is set from unaffected material.
Day 1 -
3
First comparison visit
Once we are on the job site, we reread every marked point and log the ambient conditions. In plain words, day two frequently reads higher on some points, which tells you bound water is finally moving out of the material.
Day 2 -
4
Adjustment day
Once we are on the job site, by now the drying curve shows which areas are ahead and which are behind.
Day 3 -
5
Troubleshooting anything that stalled
Once we are on the job site, a point that has not moved in two days gets investigated rather than waited on.
Day 4 -
6
Final readings and equipment out
To straighten this out, when every point matches the dry standard, we record the final reading and pull the equipment on the same visit.
Day 4 to 6 -
7
Dry down report delivered
Before we get to work, you get the drying log, the photo log, the psychrometric log and a certificate of completion.
After drying
Understanding the cost
What can affect the price
We spell out the recommended work and price before you approve the job. These examples show what may change the price breakdown.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Monitoring visit, per visit | National price breakdown for a technician reading marked points, logging ambient conditions and adjusting equipment. | $75 to $175 |
| Full monitoring across a typical three to five day drying job | National price breakdown. Commonly included in the mitigation work plan when we perform the drying. | $300 to $700 |
| Independent verification of another company's drying, per visit | National price breakdown for third party readings with a written opinion on whether the structure is dry. | $200 to $500 |
| Dry down report and certificate of completion | National price breakdown for a formal document package when one is requested separately. | $100 to $300 |
| Commercial or multi area monitoring, per day | National price breakdown for larger buildings with a few drying areas and daily reporting requirements. | $200 to $600 |
How many monitoring points there are
A single wet room may have six to ten points. A multi room loss with a few assemblies can have dozens, and each one is read every visit.How many days the job runs
Three to five visits is typical for a normal home loss. Dense materials like hardwood, plaster and concrete add visits.Property size and travel
Large properties take longer per visit simply due to the walking and the number of readings. Distance also affects the visit rate.Reporting depth you need
To straighten this out, a simple daily log is standard.Independent versus in work plan monitoring
Before we get to work, when we do the drying, monitoring is normally part of the mitigation work plan.After hours or weekend visits
Before we get to work, scheduled daytime visits carry the standard rate. Once we are on the job site, evening and weekend readings cost more, though drying rarely requires them.
Why timing matters
What can happen when the area stays wet
Once we are on the job site, water can keep moving into nearby materials even when the surface looks dry.
Equipment pulled early leaves damp material behind finishes
Before we get to work, a point that was two days from target gets covered by new drywall and flooring.
Equipment left running too long wastes your money
Before we get to work, unmonitored jobs frequently bill days that were not needed. Before we get to work, daily readings are what allow machines to come out as soon as an area is finished.
Stalled drying goes unnoticed
Once we are on the job site, without daily comparison, a material that stopped drying looks the same as one making progress.
Insurers reduce undocumented equipment days
In plain words, reviewers challenge equipment lines that no readings support. To straighten this out, missing logs commonly turn into a reduced mitigation invoice rather than a discussion.
Helpful service information
What to know about moisture monitoring
In plain words, start with the short explanation. Once we are on the job site, open a card if you want a little more detail.
What is happening inside the property
To straighten this out, it is the reading we get from the same material, in the same building, in an area the water never reached.
Read the explanation
Once we are on the job site, a dry standard is not a number from a book. To straighten this out, it is the reading we get from the same material, in the same building, in an area the water never reached.
How the next step is decided
Most materials drop quickly in the first day or two, then slow as the remaining water has farther to travel.
Read the explanation
The drying curve tells you almost everything. Most materials drop quickly in the first day or two, then slow as the remaining water has farther to travel.
What may change the work
A usable file has dated readings at marked locations and job-site pictures of equipment in place.
Read the explanation
Insurance paperwork follows a simple rule: the same points, every day, with job-site pictures. A usable file has dated readings at marked locations and job-site pictures of equipment in place.
Help near you
Moisture Monitoring near the United States
Choose your area below, or call (833) 493-2559 and describe what happened.
Available in Alabama
Moisture Monitoring in Alabama
Get help in AlabamaAvailable in AlaskaMoisture Monitoring in Alaska
Get help in AlaskaAvailable in American SamoaMoisture Monitoring in American Samoa
Get help in American SamoaAvailable in ArizonaMoisture Monitoring in Arizona
Get help in ArizonaAvailable in ArkansasMoisture Monitoring in Arkansas
Get help in ArkansasAvailable in CaliforniaMoisture Monitoring in California
Get help in CaliforniaAvailable in ColoradoMoisture Monitoring in Colorado
Get help in ColoradoAvailable in ConnecticutMoisture Monitoring in Connecticut
Get help in ConnecticutAvailable in DelawareMoisture Monitoring in Delaware
Get help in DelawareAvailable in District of ColumbiaMoisture Monitoring in District of Columbia
Get help in District of ColumbiaAvailable in FloridaMoisture Monitoring in Florida
Get help in FloridaAvailable in GeorgiaMoisture Monitoring in Georgia
Get help in GeorgiaAvailable in GuamMoisture Monitoring in Guam
Get help in GuamAvailable in HawaiiMoisture Monitoring in Hawaii
Get help in HawaiiAvailable in IdahoMoisture Monitoring in Idaho
Get help in IdahoAvailable in IllinoisMoisture Monitoring in Illinois
Get help in IllinoisAvailable in IndianaMoisture Monitoring in Indiana
Get help in IndianaAvailable in IowaMoisture Monitoring in Iowa
Get help in IowaAvailable in KansasMoisture Monitoring in Kansas
Get help in KansasAvailable in KentuckyMoisture Monitoring in Kentucky
Get help in KentuckyAvailable in LouisianaMoisture Monitoring in Louisiana
Get help in LouisianaAvailable in MaineMoisture Monitoring in Maine
Get help in MaineAvailable in MarylandMoisture Monitoring in Maryland
Get help in MarylandAvailable in MassachusettsMoisture Monitoring in Massachusetts
Get help in MassachusettsAvailable in MichiganMoisture Monitoring in Michigan
Get help in MichiganAvailable in MinnesotaMoisture Monitoring in Minnesota
Get help in MinnesotaAvailable in MississippiMoisture Monitoring in Mississippi
Get help in MississippiAvailable in MissouriMoisture Monitoring in Missouri
Get help in MissouriAvailable in MontanaMoisture Monitoring in Montana
Get help in MontanaAvailable in NebraskaMoisture Monitoring in Nebraska
Get help in NebraskaAvailable in NevadaMoisture Monitoring in Nevada
Get help in NevadaAvailable in New HampshireMoisture Monitoring in New Hampshire
Get help in New HampshireAvailable in New JerseyMoisture Monitoring in New Jersey
Get help in New JerseyAvailable in New MexicoMoisture Monitoring in New Mexico
Get help in New MexicoAvailable in New YorkMoisture Monitoring in New York
Get help in New YorkAvailable in North CarolinaMoisture Monitoring in North Carolina
Get help in North CarolinaAvailable in North DakotaMoisture Monitoring in North Dakota
Get help in North DakotaAvailable in Northern Mariana IslandsMoisture Monitoring in Northern Mariana Islands
Get help in Northern Mariana IslandsAvailable in OhioMoisture Monitoring in Ohio
Get help in OhioAvailable in OklahomaMoisture Monitoring in Oklahoma
Get help in OklahomaAvailable in OregonMoisture Monitoring in Oregon
Get help in OregonAvailable in PennsylvaniaMoisture Monitoring in Pennsylvania
Get help in PennsylvaniaAvailable in Puerto RicoMoisture Monitoring in Puerto Rico
Get help in Puerto RicoAvailable in Rhode IslandMoisture Monitoring in Rhode Island
Get help in Rhode IslandAvailable in South CarolinaMoisture Monitoring in South Carolina
Get help in South CarolinaAvailable in South DakotaMoisture Monitoring in South Dakota
Get help in South DakotaAvailable in TennesseeMoisture Monitoring in Tennessee
Get help in TennesseeAvailable in TexasMoisture Monitoring in Texas
Get help in TexasAvailable in U.S. Virgin IslandsMoisture Monitoring in U.S. Virgin Islands
Get help in U.S. Virgin IslandsAvailable in UtahMoisture Monitoring in Utah
Get help in UtahAvailable in VermontMoisture Monitoring in Vermont
Get help in VermontAvailable in VirginiaMoisture Monitoring in Virginia
Get help in VirginiaAvailable in WashingtonMoisture Monitoring in Washington
Get help in WashingtonAvailable in West VirginiaMoisture Monitoring in West Virginia
Get help in West VirginiaAvailable in WisconsinMoisture Monitoring in Wisconsin
Get help in WisconsinAvailable in WyomingMoisture Monitoring in Wyoming
Get help in WyomingYou may also need
Related water-damage services
Water Damage Drying
Our hands-on restoration team dries walls, floors, framing, and other wet materials using balanced airflow, dehumidification, and repeat moisture numbers.
Get a Quote: (833) 493-2559Structural Drying
Our hands-on restoration team uses air movement, dehumidification, and moisture monitoring to dry framing and building materials beyond the visible surface.
Get a Quote: (833) 493-2559Dehumidification
Our hands-on restoration team removes moisture from the air and wet materials, helping walls, flooring, and framing dry more evenly and completely.
Get a Quote: (833) 493-2559Moisture Detection and Mapping
Our hands-on restoration team uses meters and thermal imaging to find hidden moisture, mark areas that got wet, and guide a focused drying plan.
Get a Quote: (833) 493-2559Water Damage Inspection
Our hands-on restoration team identifies the water source, measures visible and hidden moisture, documents damage, and recommends an appropriate cleanup and drying plan.
Get a Quote: (833) 493-2559Water Mitigation
Our hands-on restoration team controls the source, removes water, protects contents, and stabilizes wet materials to prevent avoidable secondary damage.
Get a Quote: (833) 493-2559Subfloor Water Damage Drying
Our hands-on restoration team removes surface water and dries moisture trapped beneath finished flooring to protect the subfloor and surrounding materials.
Get a Quote: (833) 493-2559Water Removal
Our hands-on restoration team removes water left standing quickly, limits further damage, and prepares affected rooms for controlled drying and cleanup.
Get a Quote: (833) 493-2559Common questions
Questions about moisture monitoring
What is moisture monitoring?
Before we get to work, it is the daily part of a drying job: reading the same marked points, logging the ambient conditions, adjusting equipment and recording it all.
How can you prove my property is dry rather than just dry looking?
In plain words, by comparing readings at your marked points against the same materials in an unaffected reference area of your building.
What is a dry standard?
In plain words, it is the target reading for your specific building, taken from unaffected material of the same type. Before we get to work, there is no single national number, since normal moisture content varies by material, climate and season.
How many monitoring visits should I expect?
To straighten this out, as a rule one per day while equipment is in place, so three to six visits on a normal home loss.
Do I need to be home for the monitoring visits?
In plain words, it helps for the first and last visits so you can see the baseline and the final numbers.
Can I get a copy of the drying log?
Before we get to work, yes, and you should ask any company for one. To straighten this out, you are entitled to the readings, the photo log and the ambient records for your own property.
What happens if a reading is not improving?
To straighten this out, we treat two flat days as a problem to solve, not a delay to wait out.
Talk with a restoration specialist
Water loss in the United States?
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Water-damage help across the United States
Before we get to work, identify your state to reach restoration assessment, extraction, cleanup, and drying service in your area.
View the area on Google Maps