The water is deeper than about an inch
To straighten this out, about an inch is the practical ceiling for a wet vacuum, and that is for clean water.
Clean, gray, and contaminated water
Nationwide
Our hands-on restoration team extracts sewage water, removes unsalvageable materials, and cleans and sanitizes the area that got wet before structural drying.
Signs to keep an eye out for
Before we get to work, if you notice any of these problems, call us before water has more time to spread into nearby materials.
To straighten this out, about an inch is the practical ceiling for a wet vacuum, and that is for clean water.
Once we are on the job site, toilet paper, wipes and waste solids clog a standard submersible pump within minutes.
Before we get to work, if the route from the wet area to the door runs over carpet, wood or a living room, the removal is the moment contamination spreads.
Before we get to work, the question of where the water goes is settled before extraction starts, not during.
Before we get to work, removing water from a space that is still receiving it wastes the effort.
Once we are on the job site, low clearance spaces have no floor drain, poor access and a vapor barrier that traps liquid in pockets.
What happens
Our hands-on restoration team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
Before we get to work, power to the area is switched off from a dry location before a crew enters. To straighten this out, nobody reaches blindly into water or debris, since displaced snakes, rodents and insects shelter there.
In plain words, we identify where the contaminated water is going first.
To straighten this out, before anything is carried out, the route from the wet area to the truck is covered with sheeting or corrugated floor protection and marked as one way.
Once we are on the job site, the area that got wet is closed off and a doffing station is set at the edge, where personal protective equipment comes off and goes into sealed waste bags.
Once we are on the job site, clear liquid can be moved with a submersible pump, while water carrying solids needs a trash pump or a solids handling pump that will pass debris.
In plain words, once the depth is below what a pump can lift, extraction moves to a truck mounted extractor or a self contained unit with a sealed waste tank.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
Here is how we as a rule handle sewage water removal near the United States.
Once we are on the job site, depth and whether there are visible solids decide which pumps come on the truck.
Your callTo straighten this out, all water use in the building stops, including anything on a timer like a washing machine or a water softener.
+5 minutesBefore we get to work, young children, pets, older adults and anyone whose immune system is compromised stay clear of the affected space and of the route out.
+10 minutesIn plain words, do not use a shop vacuum, a mop or a squeegee, and do not push water toward a drive or a drain.
+15 minutesOnce we are on site a crew measures the depth, records the conditions with photographs, and confirms where the water will be discharged or hauled.
On arrivalTo straighten this out, floor protection goes along the route, sealed work area closes the area that got wet, and the doffing station is set at the boundary.
First hour on siteTo straighten this out, pumps sized for the material move the standing volume into sealed tanks or to the agreed discharge point.
First hours on siteUnderstanding the cost
We spell out the recommended work and price before you approve the job. These examples show what may change the price breakdown.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Sealed extraction and disposal of sewage water, one bathroom or utility room | National price breakdown for removal only. Cleaning, disinfection and drying are separate stages. | $600 to $1,800 |
| Sealed pump out and extraction, two to four inches of sewage over a basement floor | National price breakdown for removal only, including solids handling and controlled disposal. | $1,500 to $4,000 |
| Sewage water removal priced by affected area | National price breakdown for contaminated water work. Used when the full sequence of removal, cleaning and drying is priced together. | $7 to $15 per square foot |
| Contaminated waste hauling to a controlled disposal point, per sealed liquid tank load | National price breakdown per sealed tank load. Distance to an approved disposal point drives the spread. | $200 to $600 |
| Standby pump plus monitoring while inflow continues, per day | National price breakdown for equipment left on a float switch with return visits until the source is fixed. | $150 to $350 |
| After hours or overnight dispatch charge | National price breakdown for an out of hours start. You are told the figure before a crew leaves. | $100 to $400 |
Volume and depth of standing water
A shallow film over a bathroom floor is a wand job. A few inches over a basement slab is pump work with tanks and hose runs.
How much of it is solids
Liquid moves quickly and solids do not. Material that has to be screened, scooped and containerized by hand is the slowest part of any sewage removal.
Distance and difficulty of the route out
A walkout basement with a truck at the door is fast. A crawl space hatch, a narrow stair or fifty yards of hose to the street adds real time.
Where the water can legally be discharged
Once we are on the job site, a sanitary sewer cleanout on the property, where discharge to it is permitted, is the cheapest route.
Protection of the areas we pass through
Before we get to work, sheeting, corrugated floor protection, tack mats and doorway guards are consumed on every job.
Saturated soft goods that have to be extracted before removal
To straighten this out, carpet and padding are extracted in place so they can be carried without dripping.
Why timing matters
Once we are on the job site, water can keep moving into nearby materials even when the surface looks dry.
Before we get to work, boots, dripping carpet and dragged hoses carry material into hallways, stairs and living rooms.
In plain words, storm systems as a rule run straight to a creek, a river or a lake with no treatment at all.
Before we get to work, it is not built for volume and it is not built for contaminated water, so it clogs, it aerosolizes what it does pick up, and it becomes contaminated equipment sitting in your garage.
Once we are on the job site, bacterial load rises quickly in warm still water and the smell follows it. In plain words, materials that were borderline salvageable at hour two are as a rule gone by hour twelve.
Helpful service information
In plain words, start with the short explanation. Once we are on the job site, open a card if you want a little more detail.
Before we get to work, contaminated liquid moves from the floor into a closed waste tank without being sprayed, aerosolized or exposed to the room.
Before we get to work, sealed extraction is the phrase that separates this work from ordinary pumping. Before we get to work, contaminated liquid moves from the floor into a closed waste tank without being sprayed, aerosolized or exposed to the room.
Contaminated water is contained and taken to controlled disposal.
Where the water goes is a decision with legal weight, and it is made before extraction starts. Contaminated water is contained and taken to controlled disposal.
The area that got wet is contained and a single one way route is established, covered with sheeting or corrugated protection.
Protecting the unaffected parts of a building is a removal problem more than a cleaning problem, since removal is when material travels.
Help near you
Choose your area below, or call (833) 493-2559 and describe what happened.
You may also need
Our hands-on restoration team removes sewage water and damaged materials, then cleans and sanitizes affected rooms to address contamination and lingering odors.
Get a Quote: (833) 493-2559Our hands-on restoration team handles water from a blocked or failed sewer line with extraction, contamination control, material removal, cleaning, and sanitation.
Get a Quote: (833) 493-2559Our hands-on restoration team contains and removes septic backup water, disposes of contaminated materials, and cleans and sanitizes affected rooms.
Get a Quote: (833) 493-2559Our hands-on restoration team removes heavily contaminated water and damaged materials, then cleans and sanitizes affected rooms to reduce serious health risks.
Get a Quote: (833) 493-2559Our hands-on restoration team identifies, contains, and removes contaminated water, followed by cleaning and sanitation appropriate for the source and affected materials.
Get a Quote: (833) 493-2559Our hands-on restoration team contains and removes Category 3 water, then cleans, sanitizes, and disposes of materials that cannot be safely restored.
Get a Quote: (833) 493-2559Our hands-on restoration team removes water left standing from floors and low areas, then checks nearby materials for hidden moisture and begins drying.
Get a Quote: (833) 493-2559Our hands-on restoration team uses pumps to remove deep water left standing quickly, followed by detailed extraction and moisture checks around areas that got wet.
Get a Quote: (833) 493-2559Common questions
To straighten this out, two reasons. Before we get to work, about an inch is the practical limit for a wet vacuum even with clean water, so it cannot handle the volume.
In plain words, to a sanitary sewer cleanout on the property where discharge to it is permitted, or hauled off in sealed tanks to a controlled disposal point.
Before we get to work, storm drains as a rule discharge straight to a creek, river or lake without treatment. To straighten this out, putting sewage into one is an environmental discharge and can carry penalties for the property owner.
Before we get to work, pumps take what will pass and the rest is scooped and squeegeed by hand into sealed containers.
In plain words, the route from the wet area to the truck is covered with floor protection and run as a single controlled path.
Once we are on the job site, a small hard surfaced room is as a rule a few hours. To straighten this out, a few inches over a basement floor with solids and saturated carpet commonly takes most of a day.
Before we get to work, a bathroom or utility room commonly runs 600 to 1,800 dollars nationally for removal alone.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Before we get to work, identify your state to reach restoration assessment, extraction, cleanup, and drying service in your area.
View the area on Google Maps